Ghosting test
Does motion leave a trail?
A shape moves over three greys at the speed you choose, the same distance every frame. Look at its edges: a smear behind it is ghosting; a bright or dark halo is overdrive set too high (inverse ghosting).
How to look
- Follow the shape with your eyes rather than staring at one spot.
- A soft smear on the trailing edge is ordinary ghosting; faster panels and higher refresh rates make it shorter.
- A bright or dark outline that runs ahead or behind is inverse ghosting: try a lower overdrive setting in your monitor's menu.
- Compare the three rows: some panels ghost more on dark greys than on light ones.
What a browser can't see
A browser can't measure how fast your panel's pixels change; only your eyes or a pursuit camera can judge the trail. The shapes move at the rate your browser draws, which may be lower than your screen's maximum.
How this test works
Start first measures the rate your browser draws at, then moves a 64 pixel shape across three rows: light grey on dark, white on mid grey and dark grey on light. Each frame it moves the chosen speed divided by that rate, so 480, 960 or 1920 pixels a second mean the same speed on any screen. Esc, Stop or a hidden tab stops it.
How to read the result
Follow the shape with your eyes rather than staring at one spot. A soft smear behind its trailing edge is ghosting: the pixels have not finished changing before the next frame arrives. A bright or dark outline hugging the shape is inverse ghosting, the sign of overdrive pushed too far.
Compare the rows. A panel that ghosts on dark grey but not on light has slow transitions out of dark colours, which is common.
Common faults
Long trails on every row mean slow pixel response, which no setting removes; a higher refresh rate shortens them but doesn't cure them. Halos point to the monitor's overdrive menu: step it down until the halo goes. A measured rate lower than your screen's maximum means the browser, not the panel, is the limit, so sort that out before judging the trail.