Ghosting and overdrive
Why moving shapes leave a trail, what the overdrive setting does, and how to read the ghosting test.
Why a moving shape leaves a trail
A screen shows motion as a run of still frames. Each pixel is asked to go from its colour in one frame to its colour in the next, and that change takes time: the liquid crystal has to physically turn. If a pixel hasn't finished turning when the next frame arrives, it shows a colour part way between the two. On a moving shape, the pixels just behind its trailing edge are still turning from the shape's colour back to the background, so you see a faint copy of the shape smeared behind it. That smear is ghosting.
How long the smear is depends on two things: how fast the pixels turn, and how often frames arrive. A panel with slow pixels ghosts more. A higher refresh rate can shorten the smear but doesn't make the pixels any faster. Some transitions are slower than others; a change out of a dark grey is usually the slowest, which is why the test uses three different greys.
What the overdrive setting does
Monitors fight slow pixels with overdrive. Instead of asking a pixel to go to its target colour, the monitor briefly asks for a colour past the target, which makes the crystal turn faster, then settles it back. Done well, the pixel reaches its colour sooner and the trail shrinks.
Done too hard, the pixel overshoots and spends a moment at the wrong colour before coming back. On a moving shape that shows up as a bright or dark outline around it, often running just ahead of or behind the edge, instead of a soft smear. People call this inverse ghosting, coronas or halos. It looks different from ordinary ghosting, and it has a different fix: turn the overdrive down.
Most monitors expose overdrive in their on-screen menu under a name like response time or overdrive, with several levels. The best level is usually not the highest: it's the one that makes the trail shortest without adding a halo, and it can differ between refresh rates.
What the ghosting test shows
The ghosting test moves a 64 pixel shape across three rows: light grey on dark grey, white on mid grey, and dark grey on light grey. You pick a speed of 480, 960 or 1920 pixels a second; 960 is the default.
Before anything moves, the page measures the rate your browser is drawing at. It then moves the shape by exactly that speed divided by that rate every frame, so the shape covers the same distance in a second on any screen, and the trail you see is the panel's doing rather than the browser's. The status line tells you the step and the rate. Esc, Stop or hiding the tab stops it.
The browser can't measure how fast your pixels turn: a camera that follows the shape can, but on this page your eyes are the instrument. Follow the shape with your eyes as it crosses, the way you'd watch a car go past, rather than fixing on one spot and letting it pass through.
How to read it
Look at the edges of the shape in each row.
- A soft smear behind the trailing edge, fading out, is ordinary ghosting. Shorter is better.
- A crisp bright or dark line around the shape, sharper than a smear and sometimes ahead of the leading edge, is overshoot from overdrive.
- A shape that looks the same on all three rows has even response; one that smears badly on the dark row only has slow dark transitions, which is common and usually mild in use.
Then change things one at a time. Try the three speeds: a fast speed stretches the smear so you can see its shape, a slow one is closer to the pace of scrolling text. Change the monitor's overdrive level and run it again; you want the smear to shrink without a halo appearing. If it does appear, step back one level. Compare rows after each change.
Check the measured rate in the status line. If it's below your screen's rated refresh rate, the browser is drawing slower than the panel can show, and some of what you see is frame-to-frame distance rather than the panel's response. Safari, battery saver modes, a slow cable or a display setting left at a lower rate can all cause that. Fix the rate, then judge the trail.
What's normal and what to do
Every panel ghosts a little; a short, faint smear at the fast speed is normal and invisible in ordinary use. A long smear at the default speed, visible when you scroll a page or pan in a game, is a slow panel, and no setting removes it entirely. A higher refresh rate helps if your screen offers one and the system is set to use it.
A halo is almost always a setting. Turn overdrive down until it goes, and accept a slightly longer smear in return. If the lowest setting still halos, or the monitor has a variable refresh mode that changes how overdrive behaves, try with that mode on and off.
Ghosting and overshoot are properties of the panel type and its tuning rather than a defect; the first thing to try is a few minutes with the overdrive menu and this test.