Backlight bleed test
Is your backlight even?
Fill the screen with one colour at a time to spot light bleeding in at the edges, glow in the corners, an uneven tint or a dead pixel.
Click, tap, press Space or an arrow key for the next colour. Esc leaves.
How to look
- Darken the room and turn the brightness up.
- On black, light leaking in at the edges is backlight bleed. A glow in the corners that changes as you move your head is IPS glow, which is normal for that kind of panel.
- On white and the greys, look for darker patches or a tint that shifts across the screen.
- On red, green and blue, a dot of another colour is a stuck pixel; a dot that stays black on every colour is a dead one.
What a browser can't see
A browser can't measure your screen's brightness or how even it is: you judge that by eye, or with a camera in a dark room. Light bleed often looks worse in photos than in person.
How this test works
Start full screen fills your screen with one solid colour at a time: black, white, a near-black grey, a dark grey, then red, green and blue, in that order. A click, a tap, Space or an arrow key moves to the next colour, and Esc leaves. The page measures nothing: it only draws the field, and you judge it by eye, ideally in a dark room with the brightness up.
How to read the result
On black, light leaking in from the edges is backlight bleed. A soft glow in the corners that moves as you shift your head is IPS glow, a property of that panel type rather than a fault.
On white and the greys, look for darker patches and for a tint that drifts from one side of the screen to the other. On red, green and blue, a dot of a different colour is a stuck pixel; a dot that stays black on every field is a dead one.
Common faults
Bleed along one edge or in one corner usually comes from the panel sitting unevenly in its frame. Patches on white that never move are dirt on the panel or uneven ageing of the backlight. A tint that differs between the two halves of a large screen is often the backlight itself, not a setting.