Skip to content
BenchDevice

PadProof

Privacy

Last updated: 3 November 2026

BenchDevice makes free tools that check your hardware in the browser. This policy covers benchdevice.com and its tools: PadProof, the controller tester at benchdevice.com/padproof; the keyboard tester at benchdevice.com/keyboard; the mouse tester at benchdevice.com/mouse; the Bluetooth tester at benchdevice.com/bluetooth; the network tools at benchdevice.com/network: the WiFi tester, the connection stability tester, the bufferbloat tester and IP and network info; the display tools at benchdevice.com/display: the backlight bleed test, the stuck pixel fixer, the ghosting test, the refresh rate test, the HDR and colour check and the sharpness test; and the system tools at benchdevice.com/system: system info, the storage speed test, the CPU load test, browser capabilities, the connection watch and the battery monitor. BenchDevice is run by CodeEnzyme PVT Limited, Pakistan. Questions about your data: privacy@codeenzyme.com.

It also covers the BenchDevice app for Android (see its section below).

The short version

Controller input

PadProof reads your controller through your browser's Gamepad API: buttons, sticks and triggers, and the name and identifiers your browser reports for the controller (for example its vendor and product numbers). It does this only while the page is open. The tests run entirely in your browser. Nothing you press is sent to us or to anyone else.

If you choose "Read battery", PadProof asks your browser for access to the controller (WebHID) and reads its battery level and how it's connected, once. It keeps nothing and sends nothing.

In the motion sensor and touchpad tests, if you connect the controller, PadProof reads its motion sensors and where your fingers touch the touchpad (WebHID) during those steps only. It keeps only the tests' results, like every other result.

If you choose "Report a problem", PadProof records 10 seconds of your controller's input and saves it, with the controller's reported name and the note you type, as a file on your device. We see it only if you email it to us.

When you test rumble, PadProof asks your browser to make the controller vibrate. Your answer to "Did you feel both?" is part of the test result and stays on your device like every other result.

Keyboard tester

The keyboard tester at benchdevice.com/keyboard reads which keys you press and when, to judge them on your device. It keeps nothing you type: no text, and no record of your key presses after you leave the page. It remembers only the keyboard layout you picked, in your browser's storage, and sends nothing to us.

Mouse tester

The mouse tester at benchdevice.com/mouse reads your clicks, the wheel and where the pointer moves, to judge them on your device. It keeps nothing after you leave the page and sends nothing to us. "Report a problem" saves a file of 10 seconds of those events on your device, for you to email us if you choose.

Bluetooth tester

The Bluetooth tester at benchdevice.com/bluetooth connects, through your browser, to the one Bluetooth device you pick in your browser's list. It reads the device's name, its battery level and what the device reports about itself (its maker, model, and firmware, hardware and software versions), and times its connections. It never reads the device's address, which the browser does not give. Everything stays on the page: it keeps nothing after you leave and sends nothing to us.

Network tools

The connection stability tester, the bufferbloat tester and IP and network info at benchdevice.com/network measure your connection, so unlike the other tools they send requests over it, only to our own server at benchdevice.com:

Our server keeps none of this: it writes no logs and stores no address, request or result. The measurements are worked out in your browser and stay on the page; leaving or reloading it clears them.

WiFi tester

The WiFi tester at benchdevice.com/network/wifi runs its main test against our own server, as the other network tools do. Its extra checks reach other companies' servers, and each runs only when you press its button:

Each of those servers receives your IP address, your browser's details and the request, as with any website you open, and handles them under its own privacy policy. The page only times the answers: it sends those servers nothing else, keeps no results after you leave and sends nothing to us.

Display tools

The display tools at benchdevice.com/display draw their patterns and measure your screen in your browser: the refresh rate from the frames your browser draws, what your browser reports about HDR, colour gamut and colour depth, and the size and pixel ratio of the window. They send nothing to us or anyone else and keep nothing after you leave. The stuck pixel fixer flashes colours quickly; read its warning before you start it.

System tools

The system tools at benchdevice.com/system measure your computer in your browser: what your browser reports about the machine (its cores, memory, system, browser and graphics), how fast your browser's own storage reads and writes, how much work your processor does under load, which features your browser has, your battery's level and rate, and the devices that connect and disconnect while the connection watch runs. They send nothing to us or anyone else and keep nothing after you leave. The storage speed test writes a temporary file to your browser's own storage and deletes it when it ends; "Delete all local data" in Settings also removes one left behind. The connection watch saves its log as a text file on your device only when you ask it to.

Reports on your device

When you finish a test run, PadProof keeps its report in your browser's storage (IndexedDB) so you can reopen it under Recent runs. It keeps the 20 most recent reports. A report holds the controller's reported name and identifiers, each test's result and measurements, the date, and a random report ID. It never holds the raw recording of your input.

While the tab is open, the results of your last run and the name of the controller you tested are also kept in that tab's own temporary storage, so the results page can show them. Closing the tab removes them.

You can delete one report from Recent runs or from its results page. "Delete all local data" in Settings (benchdevice.com/settings) removes everything the site keeps in your browser: every stored report and the choices below. Clearing your browser's site data for benchdevice.com does the same. "Export JSON" saves a report as a file on your device; we never see it.

"Share image" draws a picture of a run's results on your device, with the controller's name unless you turn it off, and hands it to your device's share menu or saves it as a file. We never see it.

If you close the line that offers PadProof in another language, your browser remembers that in its storage, so the line stays closed. "Delete all local data" removes it too.

If you choose a theme in Settings, your browser remembers that choice in its storage. "Delete all local data" removes it too.

Sharing a report

Sharing a report is not available yet. When it is, a report will leave your device only when you choose "Share report", and this policy will say what is stored, where, and for how long before the feature goes live.

Hosting

Cloudflare hosts benchdevice.com. We don't collect or keep logs of individual visits. Our hosting provider processes requests only to serve the site and the network tools' test traffic. Cloudflare's own privacy policy describes how it handles this data.

Analytics

We count page views with Google Analytics so we know which tools and pages are used, and on what kinds of devices. Google's script (gtag.js, from googletagmanager.com) loads after a page has drawn, only on benchdevice.com. Google Signals and ads personalisation are off everywhere.

Everywhere, Google receives the page address, the address of the page you came from, your browser and device type, and your IP address, which it uses for an approximate location and does not store. It never receives what a tool reads from your controller, keyboard, mouse or Bluetooth device, nor a test result or measurement. If your browser sends the Global Privacy Control signal, the script does not load at all; a content blocker stops it too, and every tool works the same without it. Google's side is described in How Google uses information from sites or apps that use our services.

Advertising

There are no ads today. The site carries a Google AdSense verification tag (a line in each page's head and the file benchdevice.com/ads.txt). Neither loads anything from Google or sends Google any data. If ads are added, this policy will be updated first to say which provider, which cookies, and how you can choose, before any ad loads.

The BenchDevice app for Android

The BenchDevice app for Android has PadProof, the keyboard tester and the mouse tester. It reads your controller, keyboard, mouse or touchpad on your phone or tablet, and it has no internet access: it asks Android for no network permission, so nothing it reads can leave your device through the app.

Children

The tools are for anyone who wants to check a device, and they collect no personal data from anyone, children included.

Your rights

We hold no personal data about you: controller input, reports and the network tools' measurements stay in your browser, and you control them there. If you believe we hold data about you, or want to ask about this policy, write to privacy@codeenzyme.com.

Changes

When this policy changes, the date at the top changes too. Changes that affect your data, such as sharing reports or ads, are published here before they take effect.