WiFi tester
How good is your Wi-Fi?
One test for download and upload speed, ping, jitter, packet loss and bufferbloat, scored for streaming, gaming, calls and work. It runs against BenchDevice's own server; the extra checks further down reach other servers only when you press their buttons.
- Ping at rest
- Download
- Upload
WiFi results
—
- Download
- —
- Upload
- —
- Ping (at rest)
- —
- Jitter
- —
- Packet loss
- —
- Bufferbloat
- —
- Data used
- —
- Min / max ping
- —
- Ping P95
- —
- Peak download
- —
- Peak upload
- —
- Consistency
- —
- Call quality (MOS)
- —
- Download in MB/s
- —
- WiFi score
- —
What your connection is good for
- Streaming (4K)—
- Online gaming—
- Video calls—
- Working from home—
More checks
DNS benchmark
Times encrypted DNS lookups (DNS over HTTPS) for benchdevice.com at four public resolvers, three each. Pressing the button sends each resolver your IP address and the lookup.
Your router
Times a request to the usual router addresses on your own network, to tell a Wi-Fi delay from your provider's. Your browser asks you first; the request stays on your network.
Payload sizes
Fetches files from 64 bytes to 64 KB from BenchDevice's server, five each, to see whether bigger requests take much longer.
Cloud regions
Times requests to ten cloud data centres around the world (Amazon Web Services), fastest first. Each sees your IP address.
Popular services
Times requests to six popular sites, three each. Each sees your IP address.
Run the WiFi test first.
Plan check
Enter the download speed your provider sells you to compare it with your result.
How long downloads take
Run the WiFi test first.
- A 5 MB photo
- —
- A 1 GB app
- —
- A 50 GB game
- —
Connection details
- Browser
- —
- Connection type
- —
- Effective type
- —
- Browser's downlink estimate
- —
- Browser's round-trip estimate
- —
- Online status
- —
- Public IP
- —
- Provider
- —
- Approximate place
- —
- BenchDevice data centre
- —
30-second stability test
Four small requests a second to BenchDevice's server for 30 seconds, to catch lag spikes and drops a speed test misses.
- Round trip now: —
- Lost so far: —
- Time left: 0:30
Stability results
—
- Requests sent
- —
- Answered
- —
- Lost
- —
- Longest drop
- —
- Fastest
- —
- Typical (median)
- —
- Slow (95th percentile)
- —
- Slowest
- —
- Jitter
- —
Reading your results
- Fast speeds but high jitter or loss usually mean radio trouble: interference, a crowded channel or a weak signal. Try 5 GHz, move closer, or change channel.
- Low speed with low ping usually means the plan or the provider's line is the limit, not the Wi-Fi.
- A large bufferbloat figure means your router lets downloads and uploads queue up in front of everything else. Turning on Smart Queue Management (SQM) in the router fixes it on most lines.
- To tell Wi-Fi from your provider, run the test once on Wi-Fi and once on a cable next to the router.
How this test works
One run measures download and upload speed, ping at rest, jitter, packet loss and bufferbloat against BenchDevice's server. Quick spends 3 seconds at rest, 6 downloading and 6 uploading; Standard 5, 12 and 12; Extreme 5, 22 and 22 with more streams and more data. A ping goes every 100 ms in every phase. The checks further down the page reach other servers only when you press their buttons.
How to read the result
The tiles give each measurement; the score sums them up from 0 to 100, and call quality is on the MOS scale, which runs up to 4.5 here. Each activity gets a word: good, okay or poor. Treat the score and the verdicts as a guide, not a grade. Bufferbloat is the larger of the two rises under load; consistency says how steady the speed stayed through a phase.
Common faults
A low consistency figure means the speed swung through a phase, which points to a shared or noisy link rather than a slow one. A P95 ping far above the median means the delay comes in spikes, which a call feels as stutter even when the typical ping looks fine. Call quality well below its cap of 4.5 with good speeds comes from ping, jitter or loss, not bandwidth. The verdicts may disagree with how the connection feels: a busy hour tells a different story from a quiet one. The box above says what to try.
What a browser can't see
A browser can't read your Wi-Fi signal strength (dBm), channel or band. To see them: on Windows run netsh wlan show interfaces, on a Mac hold Option and click the Wi-Fi icon, on Linux run nmcli dev wifi. The test measures your whole connection, of which Wi-Fi is one part.