A key that never registers
Dead switch, stuck key, or a keyboard the page never saw: what each looks like in the test and what to do.
Three different problems
A key that does nothing when you press it is the most common reason to test a keyboard. The switch under the key may have died. The key may be stuck down, so a new press changes nothing. Or the keyboard as a whole may never have reached the page, so no key works. The tester treats these differently, and the result tells you which one you have.
What the tester sees
A browser does not see your keyboard. It sees key events: a press and a release, each with the name of the physical key and a time. The page cannot read the keyboard's name or model, and it cannot ask the keyboard anything. Everything in the result comes from those events, so a key that sends none is invisible until you tell the test about it.
A dead switch
In step 1 you press every key of the drawn layout once. A key counts as registered when the page sees a press and then a release. A key you pressed that stays unlit has sent nothing. When you press Next with keys still missing, the test asks about them: Try again, They don't work, or Finish without them.
Press the key a few more times first, firmly and from the middle of the keycap. A switch on its way out may work on a later try. If it never lights up, choose They don't work. The keys test then fails and names the key. Choose Finish without them when you are not sure: the keys test is then marked Not tested rather than failed, and its card names the keys you did not press.
Some keys are optional. The system often takes Meta (the key with your system's logo), the context menu key, Print Screen, Scroll Lock, Pause, Num Lock and F1 to F12, or the board simply lacks them. They are judged when they do register and otherwise left out, so they never block the run.
A stuck key
A stuck key is the opposite fault: the switch sends a press and no release, or sends the release long after. You may see a letter repeating on screen, a modifier that stays on, or a key that feels mushy and does not spring back.
The stuck test watches the key step for keys that stay down. A key held for 5000 ms or longer, or still down when the step ends, fails the test. Only the key step is judged this way: in step 2 you hold keys together on purpose. Holding Esc to stop the step does not count either.
If a key reads as stuck and you were not holding it, take the keycap off if your keyboard allows it and look for debris around the switch. A crumb or a bent stabiliser wire is enough. A short burst of air helps. If the switch itself stays down, it needs replacing. A release with no press before it means the key was already down when the step started; the test notes it as information, not as a fault.
A keyboard the page never saw
If no key lights up at all, the fault is rarely a switch. Check that the page has focus: click on it once, then press a key. Before the run starts, any key you press lights up on the drawing, so you can check without starting a test. Check the cable or the wireless connection, and that the keyboard is not in a lock mode that sends nothing.
If a step loses focus, it starts again: a key held while you switched away would read as stuck.
Esc and some keys your system keeps may not reach a normal browser tab. In Chrome and Edge, Test in fullscreen lets the page see them. If the test is not in fullscreen and such a key stays unlit, that is the browser, not the key.
Telling them apart quickly
- Nothing lights up: the page is not getting events. Check focus, the connection and any lock mode.
- One key never lights up, on repeated presses: a dead switch. Mark it as not working.
- One key lights up and stays lit, or the stuck test fails: a stuck switch or debris.
- A key the system keeps, such as Print Screen: optional, not a fault.
What to do next
A dead or stuck switch on a keyboard under warranty is a reason to ask for a replacement. On a board with hot-swappable switches, the switch pulls out and a new one pushes in. On a soldered board, a repair shop can replace one switch. If only a rarely used key is dead, you can remap it in your operating system and carry on.