Skip to content
BenchDevice

Stuck pixels versus dead pixels

What each one is, why a fixer can only help a stuck pixel, how long to run it, and why it starts with a seizure warning.

Two faults that look alike

Every pixel on your screen is three tiny lights, called subpixels: one red, one green, one blue. Mixing them in different amounts makes every colour you see. When all three are off the pixel is black; when all three are fully on it is white.

A dot that doesn't match its surroundings is one of these pixels misbehaving. There are two common ways it can go wrong, and they look similar from your chair, but they have different outlooks: software can often wake one; nothing can fix the other.

What a stuck pixel is

A stuck pixel has one or more of its subpixels frozen on. If only the red subpixel is stuck, you see a red dot. If red and green are stuck, you see a yellow one. The transistor that should switch that subpixel is holding its charge, so it stays lit whatever the picture asks for.

The easiest way to find one is the backlight bleed test's solid fields. On a red field a stuck red subpixel vanishes, because everything around it is red too; on the green or blue field it stands out as a wrong-coloured dot. Note which colours show the dot and which hide it: that tells you which subpixel is stuck.

A stuck subpixel is often recoverable. Driving it rapidly between colours can shake the stuck transistor out of its state, and that is all a pixel fixer does.

What a dead pixel is

A dead pixel has lost power or its connection. Its subpixels can't turn on at all, so it is black on every field: black on white, black on red, black on blue. Nothing you draw on the screen reaches it, so no software can wake it. A dead pixel is a hardware fault, and the only remedies are a panel repair or a replacement under warranty.

The test for a dead pixel is simple: if the dot stays black on the white field, it is dead. If it shows any colour on any field, it is stuck, and worth a try with the fixer.

Why a fixer can only help a stuck one

The fixer works by flashing colours over the pixel many times a second. For a stuck subpixel, that means the control signal is switching on and off at every frame, and that constant switching can release the stuck charge. The fixer on this site draws a small square that cycles through red, green, blue and white, one colour per frame.

A dead pixel never receives those signals, so flashing over it changes nothing. That is why the fixer's own copy says it can wake a stuck subpixel and can't fix a dead one.

How long to run it

The fixer runs for 1, 5, 10 or 20 minutes, 5 minutes by default. Start with the default. When it ends, look at the spot: the fixer can't see the pixel, so you are the judge.

If the dot is gone, you're done. If it is fainter, flickering or a different colour from before, the pixel is responding: run it again, or choose a longer time. If nothing has changed after a long run, leave the screen for a while and try again another day; some pixels free up after several attempts spread out over time. If the pixel never responds, it may be stuck in a way flashing can't release, and that becomes a warranty question too.

Place the square carefully. Drag it over the dot, or move it with the arrow keys, which step it 8 pixels at a time. If you can't quite cover the pixel, the whole-screen option flashes everything, behind its own confirmation because it is a much larger area of flashing light.

The seizure warning

Flashing light many times a second can trigger seizures in people with photosensitive epilepsy, and headaches or nausea in others. That is why the fixer shows a seizure warning before anything flashes, and nothing flashes until you deliberately press Start.

The default square is 64 × 64 pixels, a small area chosen to stay under the flash-area threshold in the accessibility guidelines. Flashing the whole screen is well over that area, which is why it asks again. If your system has reduced motion turned on, the page asks once more before it starts.

Stopping is always one action away: any key except the arrows, a click or a tap stops the flashing at once, and it stops by itself when the time is up, when the tab is hidden or when the browser leaves full screen. Don't use the fixer if flashing lights affect you, don't look straight at the square for the whole run, and stop at once if you feel unwell.

If it doesn't work

Most warranties allow a small number of faulty pixels before the screen counts as defective, and the number depends on the seller and the panel class, so read your warranty before you claim. A dead pixel, or a cluster of stuck pixels, is a stronger case than a single stuck one that the fixer might still recover.

Some people press gently on a stuck pixel through a soft cloth with the screen off. If you try it, use very light pressure: pressing hard can damage the panel and create the fault you were trying to cure.

All guidesBack to the display tools